> Menu
· Accueil des forums
· Téléchargements
· Statistiques

> Top 10
· Driver 3.4
     WG111v2
· Driver 3.1
     WG311v3
· Firmware 3.01.25
     DG834(G) v1 / v2
· Driver 2.0.0.7
     WG311v2
· Firmware 3.01.32
     DG834(G) v1 / v2
· Driver 2.1
     WG111v1
· Driver 2.0.0
     WG111v3
· Firmware 2.10.22
     DG834(G) v1 / v2
· Driver Win 7 certified
     WG111v3
· Driver 3.2
     WG511v2

> Les 5 derniers fichiers
· Firmware 1.0.16.98
     WNDR3700
· Driver 7.0
     GA311
· Firmware 1.0.14.98
     WNDR3700
· Firmware 1.2.2.46
     WNR3500L
· Firmware 3.0.7-29
     SRX5308

> Statistiques
· Fichiers : 1372
· Téléchargements : 4016726
> Firmware 3.0.7-24 , March 18, 2011
Informations
Nom du fichier Firmware 3.0.7-24
Ajouté par nicolasXP
Date d'ajout 28/05/2011
Vu 965
Taille du fichier 7.5 Mo
Téléchargés 639
Status Officiel
MD5 5fc70ac5ee1f1f2fc17c9c91da4a87db
netgear Oui
CommentaireRejoindre le sujet de discussion
New Features :
  • Suport IP multicast passthru and IGMP snooping to enable the media streaming and gaming application pass thru between WAN and LAN connects.
  • Add SNMP OID for CPU utilization.
  • Add watchdog timer and system health monitor to collect more counters and system information.
  • Allow to configure custom ports between 0 to 1023.
  • Support iPhone VPN client connection.
  • Add checkbox in LAN setup page to allow enable and disable the ARP broadcast.
  • Allow to cusomize the client ID in DHCP client configuration.
  • Support IP address group in WAN user so that it can be used in the Firewall inbound rules.
  • Allow up to 256 characters in configuring the text banner for SSL VPN portal.
  • Support per IP address base bandwidth limit in traffic meter setup.
  • Increase WAN's secondary IP address maximum to 24.

Bug Fixes :
  • The guest user is no longer able to update or delete some fields in WAN setup page.
  • Resolved the issue of WAN port getting reset when using 2 DSL lines from the same ISP with load balanacing mode.
  • DynDNS record will be updated with the new IP address when WAN port gets assigned new IP address.
  • It is now allowed to map a higher port number to a lower one in Firewall rules.
  • Admin is able to save the DHCP client vendor identifier or vendor class identifier.
  • Checking is added to prevent user to create duplicate protocol binding policies.
  • 2 PCs in DMZ network is able to access each other when they are using public IP addresses.
  • Resolved the issue that all WAN ports get reset when reconfiguring a WAN port.
  • WAN load balancing function will apply to the WAN port that is just back on line.
  • Resolved the issue that LAN port MAC address was saved in the backup file.

Known Issue(s) and Limitations :
  • SSL full tunnel is not supported for MAC OS 10.6 please use split tunnel as alternative.
  • Windows 7 64-bit SSL VPN is not supported on Firefox.
  • Defaults SSL global deny policy should be grayed out.
  • Protocol binding should be configurable only in load balancing mode, but can be configured in dedicated & auto roll over modes also.
  • LAN and DMZ host IP are accepted in DMZ-WAN and LAN-WAN respectively for inbound services.
  • Able to configure Dyndns for ADSL and Ethernet irrespective of WAN Mode type.
  • PPTP idle time out is not working when IGMP proxy enabled.
  • Bandwidth profile is not working over vpn tunnel.
Télécharger le fichier Lien mort ?

RSS

Espace De Téléchargements v2.3.1 © 2013 E2T Team

RSS Version bas débit Nous sommes le : samedi 25 mai 2013 à 21:51
Powered By IP.Board 2.3.5 © 2013  IPS, Inc.
Licensed to: Netgear-Forum