[Officiel] Firmware 3.0.7-24, March 18, 2011 Options

[nicolasXP]

Nom du fichier : Firmware 3.0.7-24
Description :
New Features :

• Suport IP multicast passthru and IGMP snooping to enable the media streaming and gaming application pass thru between WAN and LAN connects.
• Add SNMP OID for CPU utilization.
• Add watchdog timer and system health monitor to collect more counters and system information.
• Allow to configure custom ports between 0 to 1023.
• Support iPhone VPN client connection.
• Add checkbox in LAN setup page to allow enable and disable the ARP broadcast.
• Allow to cusomize the client ID in DHCP client configuration.
• Support IP address group in WAN user so that it can be used in the Firewall inbound rules.
• Allow up to 256 characters in configuring the text banner for SSL VPN portal.
• Support per IP address base bandwidth limit in traffic meter setup.
• Increase WAN's secondary IP address maximum to 24.

Bug Fixes :

• The guest user is no longer able to update or delete some fields in WAN setup page.
• Resolved the issue of WAN port getting reset when using 2 DSL lines from the same ISP with load balanacing mode.
• DynDNS record will be updated with the new IP address when WAN port gets assigned new IP address.
• It is now allowed to map a higher port number to a lower one in Firewall rules.
• Admin is able to save the DHCP client vendor identifier or vendor class identifier.
• Checking is added to prevent user to create duplicate protocol binding policies.
• 2 PCs in DMZ network is able to access each other when they are using public IP addresses.
• Resolved the issue that all WAN ports get reset when reconfiguring a WAN port.
• WAN load balancing function will apply to the WAN port that is just back on line.
• Resolved the issue that LAN port MAC address was saved in the backup file.

Known Issue(s) and Limitations :

• SSL full tunnel is not supported for MAC OS 10.6 please use split tunnel as alternative.
• Windows 7 64-bit SSL VPN is not supported on Firefox.
• Defaults SSL global deny policy should be grayed out.
• Protocol binding should be configurable only in load balancing mode, but can be configured in dedicated & auto roll over modes also.
• LAN and DMZ host IP are accepted in DMZ-WAN and LAN-WAN respectively for inbound services.
• Able to configure Dyndns for ADSL and Ethernet irrespective of WAN Mode type.
• PPTP idle time out is not working when IGMP proxy enabled.
• Bandwidth profile is not working over vpn tunnel.

Télécharger le fichier

[Jerry^]

Attention !

Ce firmware ne semble pas fonctionner sur le FVX538v1 !

En essayant l'upgrade, je me suis rendu compte ensuite que, non seulement le routeur ne s'est pas mis à jour, mais en plus il est revenu à la version précédence. Visiblement, il a utilisé le firmware secondaire pour le remettre en firmware principal.

Après avoir essayé pas mal de choses, dont le remettre à la version précédente + configuration d'origine, le routeur refuse la mise à jour en stipulant que la taille du fichier n'est pas correcte.

Quelqu'un aurait des infos par rapport à la compatibilité ?